Filter
Top Products
95
Learning the Basics
Using the DVD-ROM or multi-function drive
5.375 x 8.375 ver 2.3
Removing a disc with the computer on
To remove a compact disc (CD or DVD) with the computer
turned on:
1 Press the eject button on the drive.
Do not press the eject button while the in-use indicator light is
glowing. Doing so could damage the disc or the drive.
Also, if the disc is still spinning when you open the disc tray,
wait for it to stop spinning before you remove it.
2 Pull the tray until it is fully open, remove the disc, and
place it in its protective cover.
3 Gently push the tray in to close it.
Removing a disc with the computer off
1 Insert a slender object, such as a straightened paper clip,
into the manual eject hole.
The disc tray slides partially out of the drive (about 1
inch).
Never use a pencil to press the manual eject button. Pencil
lead can break off inside the computer and damage it.
2 Gently pull the tray out until it is fully open, remove the
disc, and place it in its protective cover.
3 Gently push the tray in to close it.