Filter
Top Products
34
Function setup
Customizing the Function Settings
1. In the main menu of Settings, press button, then use
/ button to select System, then press OK.
System Setting
Setting the parental control level
1. In the main menu of Settings, press , then press /
to select Parental, and then press OK.
2. Press
/ to select Parental Level, then press OK.
3. Press
/ to select the rating level you want to block,
then press OK. The rating and all higher ratings will be
blocked. You can select:
• 1 [Kid Safe] — Suitable for all children.
• 2 [G] — General audiences.
• 3 [PG] — Parental guidance suggested.
• 4 [PG-13] — Not suitable for anyone under 13.
• 5 [PG-R] — Parental guidance recommended.
• 6 [R] — Not suitable for anyone under 17 unless
supervised by a parent or adult guardian.
• 7 [NC-17] — Not suitable for anyone under 17.
• 8 [Adult] — All BDs and DVDs can be played.
4. Press
to go to the previous menu.
2. Press
/ to select an option, and then press OK.
3. Use
/ to select the desired setting, and then press
OK to confi rm.
4. Press
to go to the previous menu.
Optical Disc Auto Play:
If Enable is selected, it will load data and play back
automatically when you insert a Blu-ray disc. When Disable
is selected and if you insert a Blu-ray disc, the disc you can
select will be displayed on the Settings menu.
Time Zone:
This option allows you to select the desired time zone.
Screen Saver Duration:
This Blu-ray disc player has a screen saver feature that turns
the screen black when your player is inactive. You can set the
interval time you want your player to wait before activating
the screen saver.
Note: The unit shuts down automatically in about thirty
minutes if it remains idle and no activities are made.
CEC Support:
This option is used to allow the TV remote control to control
certain functions of the Blu-ray disc player; and for the Blu-
ray player to control certain functions of the TV.
On: Allow mutual control of devices through HDMI.
Off: Do not allow CEC control.
Notes:
• Not all TVs are compatible with your Blu-ray disc
player.
• The default setting is Off. Select On if CEC control is
necessary.
System
Optical Disc Auto Play Enable
Time Zone EST (GMT-05:00)
Screen Saver Duration 5 Minutes
CEC Support Off
Update Via Network
Restore factory defaults
Setting the parental control password
1. In the main menu of Settings, press , then press /
to select Parental, and then press OK.
2. Press
/ to select Parental Password, then press
OK.
3. Enter a 4-digit number for the parental password, then
use
to highlight Ok, and then press OK to confi rm.
If you forget your password, reset your player to the
factory defaults. For more information, see “Restore
factory defaults” on page 35.
4. Press
to go to the previous menu.