Filter
Top Products
16
Blu-ray Disc™ and Online Media Player connections
Connecting to a TV
Connecting to the digital AV receiver/amplifier
It is important to connect the player to the Internet and AV devices rst, before connecting the player to AC
power.
Connect a HDMI
TM
cable from the HDMI
TM
output jack on this player to the HDMI
TM
input jack on the TV.
An HDMI
TM
cable carries both video and audio signals. If you wish to use TV speakers, you do not need to
make an additional audio connection.
Route the sound from this player to the AV receiver/amplier/sound system to enhance audio output.
Connect a coaxial cable from the COAXIAL jack on this player to the COAXIAL jack on the device.
Digital AV receiver/
amplifier
(SampleIllustration)ConnectingtoaTV-HDMI
TM
cable
(SampleIllustration)ConnectingtoadigitalAVreceiver/amplier
Digital audio coaxial cable
(not supplied)
HDMI
TM
cable
(not supplied)
Blu-ray Disc™ and Online Media Player connections
Connecting to a Local Area Network (LAN)
Using a wired network provides the best performance because the attached device and player are
connected directly to the network and are not subject to radio frequency interference.
To use a wireless connection, you can connect through the built-in wireless device and a wireless access
point or router.
Your Blu-ray Disc™ and Online Media Player can be connected to your home network: