Filter
Top Products
26
SPDIF
When you connect an audio system to the COAXIAL DIGITAL output jack, the options are:
Bitstream: Selects Bitstream output if your receiver SPDIF (Coaxial) IN supports Dolby
®
or DTS
®
or
PCM audio signal.
PCM: Selects PCM output if your receiver SPDIF (Coaxial) IN only supports PCM stereo audio
signal.
Re-encode: Selects Re-encode output if your receiver SPDIF (Coaxial) IN supports Dolby
®
or DTS
®
and you want to hear both PIP audio and the movie audio on Blu-ray™ video.
Off: No audio will be output via COAXIAL DIGITAL output jack.
Bitstream: Selects Bitstream output if your receiver HDMI IN supports Dolby
®
or DTS
®
or PCM audio
signal.
PCM: Selects PCM output if your receiver HDMI IN only supports PCM audio signal.
Re-encode: Selects Re-encode if your receiver’s HDMI IN supports Dolby
®
or DTS
®
and you want to
hear both PIP audio and movie audio on Blu-ray™ video.
Off: No audio will be output via HDMI OUT jack.
HDMI
When you connect an HDMI
TM
device to the HDMI OUT jack, the available options are:
1 In the Setting menu, use the / button to select Audio and press OK.
2 Press the / button to select an option and press OK.
3 Use the / button to select the desired audio setting and press OK.
4 Press the button or the RETURN button to return to the previous menu.
Audio Setting
Customizing
Customizing
This section describes the various setting options of this Blu-ray Disc™ and Online Media Player.
If the setup option is greyed out, it means the setting cannot be changed at the current state.
1 Press the SETTING button in stop mode to display the setup screen.
2 Press OK to enter the Setting menu.
3 Use the / button to select an option and press OK.
4 Press the button or the RETURN button to return to the previous menu.
(Sample Illustration) General operations settings