Filter
Top Products
26
7.10.2. Disk Formatting
This function initializes the hard disk. If initialized, all previously recorded contents are deleted. However,
setting contents and logs are retained. Hard disks to be formatted can be selected when the C-DR0101 and
C-DR0105 is used.
• Move the cursor with the ( ) or ( ) key, and change setting values
with the (
–) or (+) key.
• Hold down the Select key for at least 1 second to start formatting.
• Return to the previous screen with the Menu key.
Formatting is started by holding down the Select key for at least 1
second again after the reconfirmation message is displayed. Pressing
the Menu key returns the display to the system maintenance screen
without formatting.
The disk error message is displayed if a disk error occurs during formatting.
DISK FORMATTING
DISK FORMATTING [ ALL]
FORMAT DISKS?
YES : SELECT KEY 1SEC
NO : MENU KEY
DISK FORMATTING
ARE YOU SURE?
YES : SELECT KEY 1SEC
NO : MENU KEY
(C-DR0101, C-DR0105)
ContentsSetting Items
HDD-A
HDD-B
ALL
Formats Hard Disk A
Formats Hard Disk B
Formats all set hard disks.