Filter
Top Products
30
Indicates the recording interval.
General Recording and Internal Timer Recording : 1/60 – 60 seconds
Alarm Recording : 1/60 – 1 seconds
Note
• Even if the Recording Setting’s Recording Interval is set to "1/60 SEC," Mirroring Recording is performed at
the recording interval of 1/30 second. (The on-screen interval indication is also "1/30 SEC" in Mirroring
Recording.) (Refer to p. 17; "General Recording Settings.")
• The higher the picture quality (resolution) and the shorter the recording interval, the shorter the possible
recording time. Conversely, the lower the picture quality and the longer the recording interval, the longer the
possible recording time. (Refer to p. 45; "Recording Time Table.")
Indicates whether or not to use the Audio recording function.
: Audio recording ON (enabled)
No indication : Audio recording OFF (disabled)
Indicates the hard disk Recording Mode. (Refer to p. 15; "Disk Settings.")
Re-Rec Mode
Stop Mode
Series Mode
• Re-Rec Mode : Overwrites old hard disk recordings in chronological order even when no available hard disk
time remains.
• Stop Mode : Stops video recording when no available hard disk time remains.
• Series Mode : Stops video recording when no available hard disk time remains, and sends out a signal
from the Control Terminal’s Disk Full output, allowing other series-connected Digital Video
Recorder to start recording. The slave Digital Video Recorder starts recording when it
receives a signal at its Recording Start input terminal even if its hard disk becomes full.
(Refer to p. 41; "Expansion System (Series Recording).")
Indicates the Disk Mode. (C-DR0101, C-DR0105) (Refer to p. 15, "Disk Settings".)
No indication : Normal Recording
M : Mirroring Recording
• About Normal and Mirroring recordings
The C-DR0101 and C-DR0105 has two built-in hard disks.
Setting the Disk Mode to "NORMAL" permits camera images to be recorded on the second hard disk when
the first hard disk becomes full.
Setting the Disk Mode to "MIRRORING" permits the same recording to be simultaneously performed on the
two hard disks. Even if one of the two disks fails, recording and playback can still be performed using the
other disk.
Indicates the hard disk recognition status. (C-DR0101, C-DR0105)
Characters are reversed for the hard disk in recording mode.
The "X" indication is displayed when the hard disk fails.
Note
Even if the Screen Display Setting’s Disk Mode Indication is set to "HIDE," the "X" indication is
displayed when the hard disk fails.
Indicates the remaining hard disk recording time calculated from the picture quality and recording interval
of current recording.
If the Disk Setting’s Recording Mode is set to "RE-REC", the remaining hard disk recording time is not
displayed.(Refer to p. 15; "Disk Settings".)
Indicates the current date and time.
The "F" indication flashes when the fan fails.
Cannot be set to "HIDE" in Screen Display Settings.
10
9
8
7
6
5
4
3