Toshiba HD-XA1KN DVD Player User Manual


 
20
2
Chapter
2
Connections
Connecting to a TV
Notes
When you connect the player to your TV, be sure to turn off the power and unplug both units from the wall outlet
before making any connections.
Connect the player directly to your TV. If you connect the player to a VCR, TV/VCR combination, video selector or AV
amplifi er, the playback picture may be distorted due to copy protection.
Connect the player to your TV to view disc contents.
INPUT
INPUT
(FROM ANTENNA)
INPUT
VIDEO INPUT
INPUT
White
Yellow
Red
White
Red
Yellow
VIDEO VIDEO VIDEO
L LL
AUDIO AUDIO AUDIO
R RR
Connect the power cord finally
to a 120V AC wall outlet.
If the TV has an S-video input,
connect the player with an
S-video cable. When using an
S-video cable, do not connect
the yellow video cable.
S-video cable
(not supplied)
Video cable
(supplied)
Audio cable (supplied)
Caution
Do not power this player using any power cord other
than the one supplied with this player.
Do not use the supplied power cord with any device
other than this player.
To view 480
, 720 , 1080 pictures, use the HDMI
OUTPUT jack or the COMPONENT OUTPUT jacks to
connect to a TV. (
page 21, “Connecting to a
device with an HDMI input”,
page 22, “Connecting
to a TV with component video inputs”). Some discs
may require use of the HDMI OUTPUT for viewing of
high resolution material.
See
page 21.
Switching output signals and setting the resolution
Turn on the player (
page 28) before you confi gure the following setting.
Press (remote control).
Player display window
11
Press repeatedly (remote
control).
Set the resolution to output from the player in
accordance with the scanning method (480
) of
the connected TV.
Select “480
” on the player display window.
22
HDMI
Make sure the HDMI
indicator TURNS OFF.