Filter
Top Products
55
SENSOR SETUP
The Alarms setup window allows you to enable, disable and configure Sensors and Relays (Control Outputs).
Configure Sensor Response
1. Click Setup on the Display screen.
2. Click Sensor.
3. Click the NO or NC check box to select Normally Open or Normally Closed for the desired sensor.
4. Enter the Delay time to define the number of seconds after the sensor is tripped until the relay is activated.
5. Enter the Relays to associate with the sensor. Two or more relays can be associated with a single sensor – separate with
commas.
6. Click Apply.
Configure Hybrid (IP) Sensors*
*Requires the HVR Software Upgrade
Normally Open (NO)
/
Normall
y
Closed
(
NC
)
Open On-Screen Keyboard
A
ssociate Sensor w/ PTZ Presets
Delay Triggering Relay Outpu
t
Assign Relay(s)
comma delineated