Filter
Top Products
User’s Manual B-2
Display Modes
Displaying movies on a TV or CRT
This section describes how to set up your system to display movies
simultaneously on your computer's LCD and on an external TV or CRT
monitor.
To connect a television, follow the steps below.
1. Turn the computer off.
2. Use a video cable (not supplied) to connect the television to the video
out port.
3. Turn the television on.
4. Turn the computer on.
You can use the hotkeys Fn + F5 or use the TV-Out button to change the
display device. Refer to Chapter 6, The Keyboard.
If a television is connected to the computer, set the TV type in Display
Properties. Follow the steps below, based on the configuration of your
computer:
For ATI Mobility Radeon
™
HD2400/HD2600*
1. Click Start Control Panel Personalization.
2. Choose Display Settings to change resolution and colors.
3. Click Start and All Programs.
4. Click Catalyst Control Center
5. Select CCC.
Some of display mode might not be supported depending on the external
monitor which you use.