Filter
Top Products
User’s Manual 2-10
The Grand Tour
Optical Disc drive
The computer will have a single layer or dual layer DVD Super Multi drive
or HD DVD drive supporting ±R Double Layer depending on its
configuration. An ATAPI interface controller is used for the operation of
these optical drives. When the computer is accessing a disc, an indicator
on the drive glows.
Region codes for DVD drives and media
The disc drive and its media are manufactured according to the
specifications of six marketing regions. When you purchase DVD-Video,
make sure it matches your drive, otherwise it will not play properly.
Writable discs
This section describes the types of writable discs. Check the specifications
for your drive to for the type of discs it can write. Use TOSHIBA Disc
Creator to write compact discs. Refer to Chapter 4, Operating Basics.
CDs
■ CD-R discs can be written only once. The recorded data cannot be
erased or changed.
■ CD-RW discs can be recorded more than once. Use either 1x, 2x, or
4x multi-speed CD-RW discs or high-speed 4x to 10x discs. The write
speed of ultra-speed CD-RW discs is a maximum of 24x speed.
DVDs
■ DVD-R and DVD+R discs can be written only once. The recorded data
cannot be erased or changed.
■ DVD RW, DVD+RW and DVD-RAM discs can be recorded more than
once.
Code Code
1 Canada, United States
2 Japan, Europe, South Africa, Middle East
3 Southeast Asia, East Asia
4 Australia, New Zealand, Pacific Islands, Central
America, South America, Caribbean
5 Russia, Indian Subcontinent, Africa, North Korea,
Mongolia
6 China