Filter
Top Products
User’s Manual 3-9
Getting Started
Restoring the pre-installed software from the Product
Recovery disc
If preinstalled files are damaged, use the Product Recovery disc to restore
them. To restore the operating system and all preinstalled software, follow
the steps below.
1. Load the Product Recovery disc in the drive and turn off the computer's
power.
2. Switch on the computer and, when the In Touch with Tomorrow
TOSHIBA prompt appears, press the F12 key to display the Boot Menu.
For 2HDD Model, If HDD1 is first, go to step 3. If HDD1 is not first, do as
follows:
■ Select <Enter Setup>
■ Press the F9 key to set to default settings, and select the [Yes].
■ When the "In Touch with Tomorrow TOSHIBA "prompt appears,
press the F12 key to display the Boot menu. Continue with step 3.
3. Use the up or down cursor key to select the CD-ROM/DVD drive in the
display menu.
4. Follow the on-screen instructions.
5. If your computer came with additional software installed, this software
can not be recovered from the Product Recovery disk. Re-install these
applications (e.g. Works Suite, DVD Player, Games, etc.) separately
from other media.
When you reinstall the Windows operating system, the hard disk will be
reformatted and all data will be lost. You can not use System Recovery
Options if restoring the pre-installed software without System Recovery
options.