157
Recording
Playback
Editing
Library
Function setup
Others
Introduction
Picture/Audio settings
Pause/Still
HDD
DVD-RAM
DVD-VIDEO
DVD-R
Auto:
Normal setting. Pause the moving image without
blurring.
Frame:
Displays high resolution still image.
Black level
DVD-VIDEO
VCD
Normal:
Normal black level.
Enhanced:
To display deeper, richer black than in “Normal” setting.
Note
• This setting is not available when the HDMI connection is
used.
Custom picture select
HDD
DVD-RAM
DVD-VIDEO
VCD
DVD-R
Select from between 4 picture settings (Normal, Setting
1-3) you stored in the memory.
Note
• This setting is not available when the HDMI connection is
used.
Custom picture setting
HDD
DVD-RAM
DVD-VIDEO
VCD
DVD-R
You can adjust fine picture quality and store up to 3
custom picture settings in the memory of the recorder.
1) Press / button to select a desired setting
from 3 settings, and then press ENTER
button.
2) Press
/ buttons to select adjustable
items, and then press
/ buttons to select
each parameter.
Brightness
(0) Darker ⇔ Brighter (14)
Contrast
(–7) Lower ⇔ Higher (7)
Color
(–7) Duller ⇔ Brighter (7)
Tint
(–7) Red ⇔ Green (7)
Edge Enhance
SOFT/OFF/SHARP
Gamma
OFF/1/2
3) After adjusting the items, press ENTER
button.
Note
• This setting is not available when the HDMI connection is
used.
Progressive conversion
HDD
DVD-RAM
DVD-VIDEO
VCD
DVD-R
There are two types of source content in pictures
recorded in DVD video discs: film content (pictures
recorded from films at 24 frames per second) and video
content (video signals recorded at 30 frames per
second). Make this selection according to the type of
content being viewed.
Auto:
Select this position normally.
The DVD player automatically detects source content,
film or video, of playback source, and converts that
signal in the progressive output format in an
appropriate method.
Video:
The DVD player filters video signal, and converts it in
the progressive output format appropriately.
Suitable for playback of video content pictures.
Film:
The DVD player converts film content pictures in the
progressive output format appropriately.
Suitable for playback of film content pictures.
The progressive output feature will be most effective
under this selection.
Note
• Depending on a disc, pictures may be cut off or doubled.
SETUP
e.g.
Custom picture select
Off
Virtual surround
Off
SAP
NormalBlack level
Normal
Picture/Audio settings
Play DNR
Pause / Still
Auto
Auto
Progressive conversion
Bitstream
Audio out select
Setting 1
Setting 2
Setting 3
Custom picture setting
RD-XS52SU/SC_Ope_E_p149-164 04.9.3, 11:15157