Filter
Top Products
58
Playing recorded contents (CONTENT MENU) (Continued)
Playback
To stop playback
Press STOP.
To pause playback (still playback)
Press PAUSE.
To resume normal playback, press PLAY button or
PAUSE button.
Note
• Sound is muted in still mode.
Resuming playback from the location last
stopped (Title resume)
The recorder memorizes the location you last stopped
playback to resume from there.
To use this function, set “HDD/RAM title play” (
page 160) to “Title resume.” The recorder will
memorize the location you last stopped at in each title,
so you can resume playback from there. For example,
if there are 6 titles, you can start each of them as if
you had stored 6 video tapes in the recorder.
• To return to the beginning of the title
During playback, press QUICK MENU button, then
press
/ buttons to select “Restart title,” then
press ENTER button.
• To play another title
Press CONTENT MENU button to display
“CONTENT MENU Title List,” then select a title.
You can make the recorder memorize only the very
last point, regardless of the number of titles. Set
“HDD/RAM title play” (
page 160) to “Serial
playback.”
• To return to the beginning of the title
Press SKIP (
) button repeatedly until the
beginning of the title appears.
• To play the other title
Press SKIP (
/ ) button repeatedly.
Notes
• Depending on conditions or contents, playback may not
start from the location last stopped at, but instead of
another location. For example, from the beginning of the
disc or title.
• Depending on a disc, there may be a slight difference
between the location the recorder memorizes and the
actual location where playback starts.
• This function is not available on DVD-R discs.
• The resuming function will not work if the write-protect tab
is set to “PROTECT” ( page 8).
Playing the digest (Skip Search)
This feature repeats playback of about 5 seconds and
skip of 1 minute from the beginning to the end of a
recorded title, so that you can view the digest of it.
1) Perform steps 1 and 2 on
page 57, and
select a title that you want to view the digest.
2) Press QUICK MENU.
Quick Menu is displayed.
3) Press
/ to select “Special playback mode”,
then press ENTER.
4) Press
/ to select “Skip search”, then press
ENTER.
The Skip Search starts.
Notes
• This feature can be used for only one title (original)
recorded on the HDD or a DVD-RAM disc.
• While using this feature, you cannot use speed-related
functions such as fast forward or fast reverse.
• If you press ENTER button while using this feature, the
normal playback starts.
• To cancel this feature, press STOP button twice.
STOP
PAUSE
RD-XS52SU/SC_Ope_E_p055-061 04.9.3, 11:1358