Filter
Top Products
44
Programmed recording (REC MENU) (Continued)
Recording
Notes
• The disc tray does not close automatically, even when the recording start time arrives. Set the recorder loaded an available
DVD-RAM/R disc beforehand.
• It it not possible to record the same contents onto both the HDD and a DVD-RAM/R disc simultaneously.
• When there is little time before a programmed recording starts, you may not be able to start another recording.
• Playback of the DVD drive pauses when a programmed recording onto the HDD starts.
• Do not change the “TV/Cable” selection of the Initial settings while a recording is programmed. If you want to change it,
cancel the program recording. After then, make the programing again if necessary.
• Confirm the “DVD compatible mode” ( page 162) setting. “Main” or “SAP” records main sound or sub-sound of multiplex
broadcasts respectively, and does not record the other. Therefore, select “Main” or “SAP” only when you record onto a DVD-R
disc.
• When recording onto a DVD-R disc, set “DVD compatible mode” (
page 162) to the desired recording sound for each timer
program.
Setting the details for every timer program
You can specify detail items for each of your timer
program.
1) Press QUICK MENU at step 3 on
page 42.
Quick Menu is displayed.
2) Press
/ to select an item and press ENTER.
AV record quality
Select an item from registered selections (1-5) for
the picture and audio quality.
Edit title name
Enter a name for the timer program.
Use the input screen to enter a name (
page
30).
DVD compatible mode
When recording onto a DVD-R disc or recording
content which will be copied to a DVD-R disc, make
this selection (
page 162) for each timer
program.
“Off” setting is neglected and regarded as “Main” in
DVD-R recording.
Aspect ratio(Video mode)
Select the aspect ratio when recording onto a DVD-
R disc. (
page 162)
High rate save
Use this feature when you want to save space
while using the best picture quality rate for
recording. This will use 9.2 Mbps for recording and
reduce the rate temporarily for the portion where
the high rate is not required where picture is fairly
constant.
Off: This feature is disabled and the normal
recording is performed.
On: This feature is enabled.
Notes
• When the audio quality is set to “L-PCM”, the picture
quality is set to “Manual 8.0 Mbps”. When the audio
quality is set to any other selection, the picture
quality is set to “Manual 9.2 Mbps”.
• While this is set to “On,” you cannot change the
mode or rate.
• The space used may not change, depending on the
picture contents.
Chap. mute
This feature automatically creates divisions for
chapters when no audio (no audible sound) portion
is found.
For example, when you have recorded a program
of music clips, you can use this feature to jump to
the beginning of a clip during playback. It does not
create completely independent chapters or
automatically divide into chapters when no audio
portion is found.
Off: This feature is disabled.
On: Division for chapters when no audio portion is
found.
Notes
• Divisions for chapters may not be created,
depending on the contents of the program or the
condition of no audio portion, or it may be created at
different positions. A division for a chapter may be
created within a music clip.
• Depending on the specification made for the
recording sound level, a division for a chapter may
not be created or it may be created at different
positions.
REC
MENU
Timer Programing
1/ 1
9:00 pm
4/3 (Sa)
Audio
Video
MediaEnd
Disc
7
4.6
D/M1
DVD
CH Date Start
Exec
23
4/10
(
Sa
)
00
pm
8
00
pm
SP
e.g.
DVD-R Broadcast Record
AV Record Quality
Genre setting
Quick Menu
AV record quality
Edit title name
DVD compatible mode
Chap. mute
Exit
High rate save
Aspect ratio(Video mode)
RD-XS52SU/SC_Ope_E_p039-047 04.9.3, 11:1344