Filter
Top Products
34
Recording a TV program
To record a TV program currently being broadcast, follow the procedures of this chapter.
Recording
1
Press HDD or DVD to select a media to record
on.
HDD : To record on the HDD.
DVD : To record on a DVD-RAM/R disc.
2
Press INPUT SELECT repeatedly to select a
recording source.
Each time you press the button, the indicator alternates.
Ch-: To record a TV program or cable program with
recorder tuner.
L-1: To record a source connected to the INPUT1
jacks on the rear panel (
page 39).
L-2: To record a source connected to the INPUT2
jacks on the front panel (
page 39).
L-3: To record a source connected to the INPUT3
jacks on the rear panel (
page 39).
L-U: To record pictures currently played (
page
116).
To record a program from a connected set top box, set
the channel to “Ch-3”, “Ch-4”, “L-1” or “L-3” according to
the connection (the same as
page 42 on
“INSTALLATION GUIDE”).
If the connection of the supplied IR control cable and
the necessary settings are all done, you can select
channels of the connected set top box with the
recorder’s remote control.
If not, select the proper channel on the set top box to
receive the desired program.
Preparation
• When you record on a DVD-RAM/R disc, load it into the recorder.
- Load a disc which has sufficient space available to record the program.
- Make sure the loaded disc is not write-protected.
• If you record on a DVD-R disc, set “DVD compatible mode” (
page 162) to “Main” or “SAP.” In DVD-R recording,
“Off” setting is regarded as “Main.”
• If you record on a DVD-R disc, set “Aspect Ratio(Video mode)” (
page 162) according to recording sources.
HDD
DVD-RAM
DVD-R
INPUT SELECT
DVD
HDD
PLAYSTOPPAUSE
REC
EXTEND
VCR Plus+ REC MENU
CONTENT MENU
EASY
NAVI
TV /VIDEO
OPEN/CLOSE
CH
VOLUME CH
QUICK MENU
INSTANT SKIP
INSTANT REPLAY
TV
TIMESLIP
HDD DVD
F
R
A
M
E
/
A
D
J
U
S
T
P
I
C
T
U
R
E
S
E
A
R
C
H
S
K
I
P
S
L
O
W
SETUP DELETECLEAR
INPUT SELECT
LIBRARY
ANGLE
AUDIO
CHP DIVIDE
SUBTITLE
EDIT MENU
DISPLAY REMAIN TIME BAR
ZOOM P in P
PROG/HDMI
DVD
FL SELECT
REC MODE
DIMMER
ENTER
Start
RD-XS52SU/SC_Ope_E_p025-038 04.9.3, 11:1334