Toshiba RD-XS52SC DVR User Manual


 
45
Playback
Recording
Editing
Function setup
Others
Introduction
Library
Shifting a time period of a recording (Time
Shift)
If a prior TV program extends beyond its scheduled
time and into one that you programmed, you can shift
the programmed start and end time of the recording.
1) Press REC MENU.
REC MENU appears.
2) Press
/ to select a timer program you want
to shift the time period.
3) Press EXTEND.
Start time and End tme are ready to be input.
4) Press EXTEND repeatedly.
Each time you press the button, Start time and
End time is shifted in 10 minutes intervals to, up
to 60 minutes later.
5) Press ENTER.
6) Press REC MENU to exit.
Note
After you shifted the time of a timer program which will be
repeated daily or weekly, you should restore the original
start/stop time for future recordings.
Adding a timer program
1) Press REC MENU.
REC MENU appears.
2) Press
to select a blank line, then press
ENTER.
3) Press
/ to select the item, then press
ADJUST to set the item.
4) When complete, press ENTER.
5) Press REC MENU to exit.
Note
While the recorder is preparing for or executing a
programmed recording, you cannot add a timer program
which will start within 5 minutes and 15 seconds from the
current time.
Deleting a timer program
1) Press REC MENU.
REC MENU appears.
2) Press
/ to select a timer program you want
to delete.
3) Press QUICK MENU.
Quick Menu appears.
4) Press
/ to select Program cancel, then
press ENTER.
Check the message, then delete the entry.
5) Press REC MENU to exit.
Note
You cannot delete a timer program while another is
executed.
Correcting a timer program
1) Press REC MENU.
REC MENU appears.
2) Press
/ to select a timer program you want
to change, then press ENTER.
3) Press
/ to select an item, then press
ADJUST to set the item.
4) Press ENTER.
The modification is registered.
5) Press REC MENU to exit.
Important
You cannot correct a timer program within 5 minutes before
the recording start time. You can only delete the timer
program.
Note
You can program a timer recording whose start time has
already passed, unless the another program recording will
start within 5 minutes. The portion of the program before
the recording starts cannot be saved.
Setting On may create many chapters, and their
number may reach the maximum allowed. At that
point, no more chapters can be created. In this case,
decrease the chapters, for example by combining
chapters ( page 95).
This feature is not available on DVD-R discs. To
create chapters automatically during recording on
DVD-R discs, set DVD-Video:CHP create. (
page
162).
Genre setting
You can set a genre before setting programmed
recording.
To see the registered list, refer to Genre setting
(
page 163).
Set the genre according to recording contents.
The selection you have made for the timer program
is shown at the bottom of the display.
1:00pm 1:54pm
1:20pm
20 minutes
extend
Time Shift
2:14pm
RD-XS52SU/SC_Ope_E_p039-047 04.9.3, 11:1345