Filter
Top Products
167
Recording
Playback
Others
Introduction
Editing
Function setup
Library
Program
Timer programming cannot be completed.
• Clock setting has not been completed.
→Complete the clock setting (
page 37,
“INSTALLATION GUIDE”).
• The programs list is full.
→Cancel unwanted programs (
page 45).
VCR Plus+ recording does not work properly.
• Guide channel setting is not completed.
→Complete the guide channel setting (
page 46,
“INSTALLATION GUIDE”).
• TV/Cable setting is not completed.
→Complete TV/cable setting (
page 40,
“INSTALLATION GUIDE”).
Recording
Cannot be recorded on a DVD-RAM disc.
• The disc is protected from deleting data.
→Set the write-protect tab to the opposite of
“PROTECT” (
page 8).
• The disc is protected by a PC or the recorder.
→Disable the protection on the device which
protected the disc.
• The disc space is not sufficient.
→Delete unwanted data (
page 52) or prepare a
new disc.
• The disc is not initialized.
→Initialize the disc (
page 28).
• The disc may contain errors.
→Complete the physical format on the disc
(
page 29).
• The physical format on the disc is not completed.
→Complete the physical format on the disc
(
page 29).
Cannot be recorded on the HDD.
• The DVD mode is selected.
→Press HDD button.
• The disc space of the HDD is not sufficient.
→Delete unwanted data (
page 52) or move the
contents to DVD-RAM discs (
page 106).
• Some causes such as power failure may set the
recorder to reject the operation to protect the HDD.
→Copy necessary contents recorded in the HDD to
a DVD-RAM disc, and initialize the HDD.
RD-XS52SU/SC_Ope_E_p165-179 04.9.3, 11:15167