Filter
Top Products
167
Recording
Playback
Others
Introduction
Editing
Function setup
Library
Program
Timer programming cannot be completed.
• Clock setting has not been completed.
→ Complete the clock setting (
page 30,
“INSTALLATION GUIDE”).
• The programs list is full.
→ Cancel unwanted programs (
page 43).
VIDEO Plus+ recording does not work properly.
• Guide channel setting is not completed.
→ Complete the guide channel setting (
page 37,
“INSTALLATION GUIDE”).
Recording
Cannot be recorded on a DVD-RAM disc.
• The disc is protected from deleting data.
→ Set the write-protect tab to the opposite of
“PROTECT” (
page 8).
• The disc is protected by a PC or the recorder.
→ Disable the protection on the device which
protected the disc.
• The disc space is not sufficient.
→ Delete unwanted data (
page 50) or prepare a
new disc.
• The disc is not initialized.
→ Initialize the disc (
page 28).
• The disc may contain errors.
→ Complete the physical format on the disc
(
page 29).
• The physical format on the disc is not completed.
→ Complete the physical format on the disc
(
page 29).
• The disc has been recorded in the NTSC system.
You can replay a title that has been recorded in the
NTSC system, but you cannot display it in the
thumbnail or use the edit or dubbing functions.
→ You can use the recorder to initialize the disc to
use it with this recorder, but the contents will be
lost. If you do not want to initialize the disc, you
can still play it, but no other functions are available.
Cannot be recorded on the HDD.
• The DVD mode is selected.
→ Press the HDD button.
• The disc space of the HDD is not sufficient.
→ Delete unwanted data (
page 50) or move the
contents to DVD-RAM discs (
page 106).
• Some causes such as power failure may set the
recorder to reject the operation to protect the HDD.
→ Copy necessary contents recorded in the HDD to
a DVD-RAM disc, and initialize the HDD.