Filter
Top Products
32
Function setup
4) Press “8888” using number buttons. (Please note, this
is presetting password of this unit). Then press ENTER.
Press ENTER again to list the parental level.
Enter Password:
Set Password
Parental control :8. Adault
The parental lock level is equivalent to the following ratings:
Level 1: Kid Safe
Level 2: G
Level 3: PG
Level 4: PG-13
5) Press
/ to select the rating from 1 to 8. Rating one (1)
has the most restrictions while rating eight (8) can virtually
playback all DVD software.
6) Press OPEN/CLOSE button to activate the Parental Level
setting.
If the DVD has been designed to temporarily cancel the
Parental Level, the screen will change depending on which
disc is played. If you select “YES” with the ENTER button,
“Enter Password” screen will appear. Input the 4-digit
password as you have set then followed by ENTER button
and playback will start. If “NO” is selected, press the OPEN/
CLOSE” to remove the disc.
Notes
• If you input a wrong password, press CLEAR button and
re-enter your 4-digit password again.
• You cannot play DVDs rated higher than the level you
selected unless you cancel the parental lock function.
Parental Control
DVDs equipped with the password function are rated according
to their content. The contents allowed by a parental lock level
and the way a DVD can be controlled may vary from disc to disc.
For example, if the disc allowed, you could edit out violent scenes
unsuitable for children and replace them with more suitable
scenes, or you could lock out playback of the disc altogether.
• DVDs may or may not respond to the parental lock settings.
This is not a defect in the DVD player. Make sure this function
works with your DVDs.
1) Press SETUP button.
2) Press
/ to select Rating.
3) Press
button to
select Parental
control, then press
ENTER button.
“Enter Password”
screen will appear.
Setting details
DVD
Level 5: PG-R
Level 6: R
Level 7: NC-17
Level 8: Adult
Night Mode
Night mode is equivalent to Dynamic Range Compress.
When it is On, it reduces the variations between loud and
soft sounds in audio output. You can still hear softer sounds
and dialog even in very low volume.
1) Press SETUP button.
2) Press
/ button to select Audio.
3) Press
button, then use the / button to select
Night Mode.
4) Press ENTER button, then use the
/ button to
select On or Off mode.
5) Press ENTER
button.
6) Press SETUP
button to exit the
menu.
Note
Night mode is Dynamic Range Control (DRC) option for
analog audio output.
:PCM
Off
On
Off
PCM
Raw
Selects the output sound format corresponding to your
system connection.
1) Press SETUP button.
2) Press
/ button to select Audio.
3) Press button, then use the / button to select
Digital Output.
4) Press ENTER
button, then use
the
/ button
to select the
output sound
format (Off, PCM
or Raw).
5) Press ENTER
button.
6) Press SETUP button to exit the menu.
PCM: Select when connected to a Multi-channel digital
stereo amplifier. The DVD player outputs sound in the PCM
Multi-channel format when you play a DVD recorded on the
Dolby Digital, MPEG1 OR MPEG2 recording system.
Raw: Disc audio raw data will be output. Select “Raw” if
your amplifier supports “DTS”.
Off: To disable Digital Output.
Notes
• When you make a connection to a TV, Dolby Surround
Pro Logic or stereo system via the analog audio jacks,
select “PCM” or “Raw”.
• If this DVD player is connected to a TV using HDMI,
make sure to select “PCM”.
Digital Output
Rating
Parental control :8. Adault
Set Password
Customizing the Function Settings (continued)