Filter
Top Products
33
Function setup
Set Password
New Password can be set to replace the default password.
1) Press SETUP button.
2) Press
/ button to select Rating.
3) Press
button, then use the / button to select Set
Password.
4) Press ENTER button. “Enter Password” screen will
appear.
5) Press the number buttons to input the current
password (If the password has not been set yet after
you purchase this unit, it is “8888”). Then press
ENTER.
6) Press ENTER button again, “New Password” screen will
appear. Press the number buttons to input the new
password.
7) Press ENTER button. Now your new password has been
set. Be sure to remember this number!
If you forget the password, you can erase
your current password by pressing number
button 8 on the remote control four times,
then press ENTER button to confirm the
setting.
PASSWORD: 8888
DVD
DivX
®
Registration
Some DivX
®
Video-On-Demand files required registration
code, please get the code of your DVD player as follow:
1) Press SETUP button.
2) Press
/ button to select Misc.
3) Press
button, then use the / button to select
DivX Registration.
4) Press ENTER button, your registration code will be
shown.
5) Press ENTER button.
6) Press SETUP button to exit the menu.
Note
This registration code is for DivX
®
Video-On-Demand only.
Do not apply this code for other applications or websites.
Screen saver :On
DivX Video On Demand
Your registration code is :
R
Screen Saver
To turn on or off the screen saver (screen protection
to prevent image burn).
1) Press SETUP button.
2) Press
/ button to select Misc.
3) Press
button, then use the / button to select
Screen saver.
4) Press ENTER button, then use the
/ button to
select the On or Off mode.
6) Press SETUP button to exit the menu.
HDMI Control :Off
Screen saver
Off
On
Misc
Screen saver :On
HDMI Control :On
Use Default Settings
If you want to return the initial language setting such as
Language, Video, Audio and etc. to the factory default, do
the following:
1) Press SETUP button.
2) Press
/ button to select Misc.
3) Press
button to select Use Default Settings, then
press ENTER button.
4) Press
/
button to select
“Yes”, then press
ENTER button.
The original
setting will be
restored.
5) Press SETUP
button to exit the
menu.
Screen saver :On
Do you want to use default setting?
Note
When you reset the DVD player to the factory default, the
DVD player will take 3-5 seconds to reset.
Note
When you leave the unit in DVD stop mode for approximately
5 minutes, the screen saver of the DVD player automatically
appears if you set the Screen saver to On mode. To turn off
the screen saver, press the PLAY button.