Filter
Top Products
34
Function setup
Customizing the Function Settings (continued)
Setting details
HDMI Control
You can control this DVD unit from TV’s remote which is
connected via HDMI cable.
1) Press SETUP button.
2) Press
/ button to select Misc.
3) Press
button, then use the / button to select
HDMI Control.
4) Press ENTER button, then use the
/ button to
select the On or Off mode.
6) Press SETUP button to exit the menu.
Functions available for the HDMI Control
• One touch play
When the operations with following buttons of this
unit’s remote control are performed, the TV will
automatically turned on and switch to appropriate
input channel.
Buttons for one touch play: [PLAY], [POWER].
• System information
Get & Set Menu Language:
This unit recognizes the OSD languages set for the
TV and automatically set the same language as the
player menu language (OSD menu language) for this
unit.
Power off:
When you turn the TV off, this unit will automatically
turns off.
Receiving operational signal from TV’s Remote:
You can operate this unit with TV’s remote control.
Check your TV owner’s manual for details.
Note: This function may not work properly depending
on the TV you are connecting.
Screen saver :On
HDMI Control
Off
On
Off: To deactivate HDMI Control.
On: To activate HDMI Control.