Filter
Top Products
41
(E) 23HLV85
E
S
F
Connecting
your TV
Using the
Remote Control
Setting up
your TV
Appendix
Index
Introduction
Using the TV’s
Features
DVD Playback
Changing the password
1. Press SETUP in the stop mode, and then press y
or z to select Rating Level.
2. Press •, and then use number buttons to key in a
4-digit password.
3. Press x, and then press y or z to select New
Password.
Subtitle Language
Menu Language
Rating Level
New Password
TV Screen
OSD Language
Digital Output
Special
: Move
: Next
- - - -
Audio Language
4. Press •, and then enter a 4 digit password.
Enter it again when requested.
5. Press SETUP to resume normal playback.
TV Screen
You can watch TV in various picture formats.
1. Press SETUP in the stop mode, and then press y
or z to select TV Screen.
2. Press •, and then press y or z to select 4 : 3 LB,
4 : 3 PS, or 16 : 9 Wide.
New Password
TV Screen
OSD Language
Digital Output
Special
4 : 3 LB
4 : 3 PS
16 : 9 Wide
Rating Level
Subtitle Language
Menu Language
Audio Language
: Move
: Next
3. Press ENTER.
4. Press SETUP to resume normal playback.
Note :
Depending on the disc, the TV screen feature may
not be available.
Disc OSD language selection
The on-screen display can be shown on the screen in
your specified language.
1. Press SETUP in the stop mode, and then press y
or z to select OSD Language.
2. Press •, and then press y or z to select your
desired language.
All the on screen displays will appear in the
selected language.
3. Press SETUP to resume normal playback.
Digital audio output
You can select the output for SPDIF (Sony/Philips
Digital Interface).
1. Press SETUP in the stop mode, and then press y
or z to select Digital Output.
2. Press •, and then press y or z to select OFF,
RAW (Original SPDIF signal), or PCM (Pulse
Code Modulation: Encodes SPDIF signal to
PCM).
New Password
TV Screen
OSD Language
Digital Output
Special
OFF
RAW
PCM
Rating Level
Subtitle Language
Menu Language
Audio Language
: Move
: Next
3. Press ENTER.
4. Press SETUP to resume normal playback.
DRC (Dynamic Range Compression)
Confines the audio range to prevent excessively loud
sound yet allows you to hear the low sounds clearly.
1. Press SETUP in the stop mode, and then press y
or z to select Special.
2. Press •, and then press y or z to select DRC Off
(Decrease the DRC range) or DRC On (Reset the
DRC range to original values).
New Password
TV Screen
OSD Language
Digital Output
Special
DRC Off
DRC On
Rating Level
Subtitle Language
Menu Language
Audio Language
: Move
: Next
3. Press ENTER.
4. Press SETUP to resume normal playback.
#01E37-44_23HLV85 05.6.24, 8:16 PM41
Black