Filter
Top Products
10
(E)42DPC85
Connecting
your Monitor
Connecting a VCR
This connection allows you to watch video tapes.
You will need:
• one set of standard A/V cables
IN from ANT OUT to TV
CH 3
CH 4
VIDEO
AUDIO
LR
IN
OUT
Connecting a cable converter box and VCR
This connection allows you to watch basic and premium cable channels
and watch video tapes.
To watch basic and premium cable channels, put the monitor in
VIDEO 1 mode and set the VCR to channel 3 or 4 (whichever channel
is vacant in your area), and use the converter box to change channels.
You will need:
• two coaxial cables
• one set of standard A/V cables
IN from ANT OUT to TV
CH 3
CH 4
VIDEO
AUDIO
LR
IN
OUT
INOUT
Cable converter box
Note:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have a VCR with S-video, use an
S-video cable (in the S-video terminals)
instead of the standard video cable.
Do not connect a standard video cable and
an S-video cable to Video-1 at the same time,
or the picture performance will be
unacceptable.
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under Copyright
Law and may subject you to civil and
criminal liability.
From Cable Box or Antenna
Stereo VCR
Monitor
Stereo VCR
Note:
If you have a mono VCR, connect L/Mono to
VCR Audio OUT using only one audio cable.
If you have a VCR with S-video, use an
S-video cable (in the S-video terminals)
instead of a standard video cable. Do not
connect a standard video cable and an
S-video cable to Video-1 at the same time, or
the picture performance will be unacceptable.
From cable
Monitor
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under Copyright
Law and may subject you to civil and
criminal liability.
#01E09-15_42DPC85 7/29/05, 12:47 PM10
Black