Filter
Top Products
14
(E)42DPC85
Connecting
your Monitor
Connecting two VCRs
This connection allows you to record (dub/edit) from one VCR to
another VCR while watching a videotape.
–To record one program while watching another, tune VCR1 to the
channel to record, tune VCR2 to the channel to watch, and select
VIDEO 2 on the monitor.
You will need:
• one signal splitter
• three coaxial cables
• three sets of standard A/V cables
IN from ANT OUT to TV
CH 3
CH 4
VIDEO
AUDIO
LR
IN
OUT
IN from ANT OUT to TV
VIDEO AUDIO
CH 3
LR
CH 4
IN
OUT
OUT OUT
IN
Splitter
Connecting a camcorder
This connection allows you to watch video materials recorded on a camcorder.
You will need:
• one set of standard A/V cables
VIDEO
AUDIO
OUT
L
R
Note:
If you have VCR (VCR1) with S-video, use
S-video cables instead of standard video
cables for better picture performance. Do not
connect both a standard video cable and an S-
video cable to Video-1 at the same time or the
picture performance will be unacceptable.
Do not connect the same VCR to the output
and input terminals is on the monitor at the
same time. To dub or edit, VCR 2 must select
Line IN, and the monitor must select VIDEO 1.
VCR1
From Antenna
Monitor
VCR2
Note:
If you have a camcorder with S-video, use an
S-video cable instead of a standard video
cable for better picture performance. Do not
connect both a standard video cable and an
S-video cable at the same time or the picture
performance will be unacceptable.
Camcorder
Video-3 (side panel)
The unauthorized recording, use,
distribution, or revision of television
programs, videotapes, DVDs, and other
materials is prohibited under Copyright
Law and may subject you to civil and
criminal liability.
#01E09-15_42DPC85 7/29/05, 12:48 PM14
Black