Filter
Top Products
7
(E)42DPC85
Connecting
your Monitor
Using the
remote control
Setting up
your Monitor
Appendix
Index
Introduction
Operating
your Monitor
Introduction
Welcome to Toshiba
Thank you for purchasing this Toshiba plasma monitor. The goal of
this manual is to guide you through setting up and operating your
Toshiba monitor as quickly as possible.
The model and serial numbers are on the back of your monitor. Write
these numbers in the space provided on the front cover of this manual
for your records.
Instructions in this manual are based on using the remote control.
You also can use the controls on the monitor if they have the same
name as those referred to on the remote control.
Please read all the safety and operating instructions carefully, and keep
this manual for future reference.
Supplied accessories
Check that you have the accessories and items shown.
Owner’s Manual Remote control Batteries for the remote control
(This book) CT-90232 LR6 (AA) × 2
Power cord* Clip
(three wire
grounding type)
Use this clip to attach the
monitor to a wall, pillar, or
other immovable structure.
See item 19 on page 3.
Noise filter
* The power cord supplied with this product is to be used in the United States and Canada only. If this
product is used in another country, use a power cord which conforms to the laws or regulations of that
country.
Do not remove the noise filter from the power cord.
The noise filter is used to reduce the interference in image or sound of other electronic equipment.
NOTE: THIS MONITOR DOES
NOT CONTAIN A TUNER.
A set-top box (i.e., cable box or analog/
digital receiver) is required to receive: (1)
analog and/or digital broadcast signals from
an antenna; and (2) analog and/or digital
cable.
For more information, refer to the
applicable connection and setup.
#01E07-08_42DPC85 7/29/05, 12:46 PM7
Black