Filter
Top Products
38
HM66 (E/F) Web 213:276
Chapter 5: Using the TV’s basic features
Unlocking programs temporarily
If you try to tune the TV to a program that exceeds the rating
limits you set, the TV will enter program lock mode and the
following message will appear on-screen:
You can either temporarily unlock the program or select an
unlocked program to watch.
To temporarily unlock the program:
1 Press W.
2 Enter your four-digit PIN code and press T. If the correct
code is entered, the program lock mode is released and the
normal picture appears. All locking is disabled until the
TV is turned off, and will be enabled when the TV is
turned on again.
Using the input lock feature
You can use the Input Lock feature to lock the video inputs
(VIDEO 1, VIDEO 2, ColorStream HD-1, ColorStream
HD-2, HDMI 1, and HDMI 2) and channels 3 and 4. You will
not be able to view the input sources or channels until you
unlock the inputs.
To lock/unlock the video inputs:
1 Press Y and highlight the Locks menu icon.
2 Press b to display the PIN code entering screen.
3 Enter your four-digit PIN code and press T.
4 Press b to highlight Input Lock and press c.
5 Press B or b to select the level of video input locking you
prefer, as described below.
Video: Locks VIDEO 1, VIDEO 2, ColorStream HD1/
HD2, HDMI 1/HDMI 2.
Video+: Locks VIDEO 1, VIDEO 2, ColorStream HD1/
HD2, HDMI 1/HDMI 2, and channels 3 and 4.
• Select Video+ if you play video tapes via an ANT input.
• When a CableCARD™ is inserted, Video+ will not
lock channels 3 and 4.
Off: Unlocks all video inputs and channels 3 and 4.
6 Press T.
This program exceeds the rating limit you set.
Push 'mute' to enter PIN.
Locks Active
Enter PIN code to temporaily un-
block.
Cancel
****
Done
MENU
ENTER
EXIT
Navigate
Select
Back Exit
Enable Rating Blocking
Edit Rating Limits
Channels Block
Input Lock Off
OffFront Panel Lock
New PIN Code
Locks
Off
Off
Video
Video +
HM66_EN.book Page 38 Thursday, February 23, 2006 2:49 PM