Filter
Top Products
6
HM66 (E/F) Web 213:276
Chapter 1: Introduction
TV back panel connections
For an explanation of cable types and connections, see the Installation Guide.
1234 5
6
7
98
1 VIDEO 1 IN — Standard (composite) video and standard
audio inputs plus optional S-video inputs for connecting
devices with composite video or S-video output.
Note: Standard (composite) video and S-video cables
carry only video information; separate audio cables are
required for a complete connection.
2 ColorStream
®
HD-1 and ColorStream
®
HD-2 —
Two sets of ColorStream
®
high-definition component
video inputs (with standard stereo audio inputs) for
connecting devices with component video output, such as
a Toshiba DVD player with ColorStream
®
.
Note: Component video cables carry only video
information; separate audio cables are required for a
complete connection.
ColorStream
®
HD-1 and ColorStream
®
HD-2
Audio IN — ColorStream HD-1/2 audio input terminals
are shared with HDMI 1/2 analog audio input terminals,
and their use can be configured in the Setup menu
(- “Setting the ColorStream HD audio mode” page 20).
3 Variable Audio OUT — Standard analog audio outputs
for connecting an analog amplifier with external speakers.
4 A/V OUT — Standard composite video and analog audio
outputs for connecting a VCR for editing and dubbing.
5 IR OUT — For controlling infrared remote-controlled
devices through the TV. You can connect up to two
devices with an IR blaster cable, and then control the
devices using the TV’s IR pass-through features.
6 ANT 1 and ANT 2 — Two inputs that support analog
(NTSC) and digital (ATSC) off-air antenna signals and
analog and digital (QAM) Cable TV signals.
Note: If you have an antenna only, connect it to ANT 1. If
you have both cable TV and an antenna, connect the
cable TV to ANT 1 and the antenna to ANT 2.
7 HDMI™ 1 and 2 IN — Two High-Definition Multimedia
Interface inputs receive digital audio and uncompressed
digital video from an HDMI device or uncompressed
digital video from a DVI device. Also see item 2.
8 Digital Audio OUT — Optical audio output in Dolby
Digital or PCM (pulse-code modulation) format for
connecting an external Dolby Digital decoder, amplifier,
A/V receiver, or home theater system with optical audio
input.
9 CableCARD™ slot — For use with a digital security
card and digital cable TV service (provided by your local
cable operator) to view encrypted digital programming
(- page 20).
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
CableCARD is a trademark of Cable Television Laboratories, Inc.
HM66_EN.book Page 6 Thursday, February 23, 2006 2:49 PM