Toshiba 56HMX96 Projection Television User Manual


 
10
HMX96 (E/F) Web 213:276
Chapter 1: Introduction
1210 119
8
8 HDMI
1 IN and HDMI
2 IN — Two High-Definition
Multimedia Interface inputs receive digital audio and
uncompressed digital video from an HDMI device or
uncompressed digital video from a DVI device. Also see
item 2.
Note: HDMI 1 (and 2) IN share analog audio inputs with
ColorStream HD-1 (and HD-2) IN. To specify the use of the
audio inputs for a connected HDMI (or DVI) device, see
“Setting the HDMI audio mode” on page 29.
9 G-LINK
— For use with the enclosed IR blaster/
G-LINK
cable to enable the TV Guide On Screen
recording features (- Installation Guide).
10 Digital Audio OUT — Optical audio output in Dolby*
Digital or PCM (pulse-code modulation) format for
connecting an external Dolby Digital decoder, amplifier,
A/V receiver, or home theater system with optical audio
input.
11 RJ-45 (Ethernet) (THINC
system**) — Allows you
to connect the TV to your home network. See boxed note
below.
12 CableCARD
slot — For use with a digital security
card and digital cable TV service (provided by your local
cable operator) to view encrypted digital programming
(- page 29).
HDMI, the HDMI logo and High-Definition Multimedia Interface are
trademarks or registered trademarks of HDMI Licensing LLC.
CableCARD is a trademark of Cable Television Laboratories, Inc.
* Manufactured under license from Dolby Laboratories.
Dolby, Pro Logic, and the double-D symbol are registered
trademarks of Dolby Laboratories.
**THINC
system
(Toshiba Home Interactive Network Connection)
The RJ-45 (Ethernet) port allows your Toshiba TV to
connect to your home network. This revolutionary home
entertainment networking system lets you access MP3
audio files and JPEG picture files that are stored on a
networked PC (as shared files) and play/display them on
your TV.
You also can play your shared MP3 audio files through a
connected audio system.
See Installation Guide and Chapter 7 for details.
HMX96_EN.book Page 10 Friday, April 28, 2006 12:03 PM