Filter
Top Products
65
Function setup
AUDIO MENU
E.A.M.
D.R.C.
Audio Out Select
Setup Menu
3D
3D (Headphone)
Dialog
»
Normal
Audio Out Select
VCDDVD-V CD
Select the output sound format corresponding to your
system connection.
For details of sound recording systems, see
41
.
Bitstream: Select when connected to an amplifier
equipped with a Dolby Digital, DTS,
MPEG1 or MPEG2 decoder.
58
59
The unit outputs digital audio
information in the bitstream format
when you play a DVD video disc
recorded in the Dolby Digital, DTS,
MPEG1 or MPEG2 recording system.
Analog 2ch: Select when connected to a TV, or
Dolby Pro Logic or stereo system via
the analog audio jacks.
54
58
PCM: Select when connected to a 2 channel
digital stereo amplifier.
60
The unit outputs sounds in the PCM
2ch format when you play a DVD video
disc recorded on the Dolby Digital,
MPEG1 or MPEG2 recording system.
E.A.M.
VCDDVD-V CD
You can obtain expansive virtual surround sound
effects from just two speakers.
Normal: Normal sound.
3D: To obtain expansive virtual surround sound
effects from just two speakers.
3D (Headphone):
To obtain expansive virtual surround sound
effects when using headphone.
Dialog: To control critical center channel information
to make dialogue more intelligible (only
when playing a DVD video disc recorded on
the Dolby Digital recording system).
• To use this enhancement on sounds output
from the BITSTREAM/PCM jack, be sure
to set “Audio Out Select” to “PCM.”
Note
Pressing the E.A.M. button on the remote control also
allows you to achieve the same setup.
53
D.R.C.
DVD-V
Turn on or off a function that makes faint sounds
easier to hear even if you lower the volume during
late hours playback.
D.R.C. = Dynamic Range Control
ON : Dynamic range is reduced.
OFF: Full dynamic range is maintained.
Notes
• This function works only during playback of Dolby
Digital recorded discs.
• The level of Dynamic Range Reduction may differ
depending on the DVD disc.