12
This set-up will enable you to:
– watch an unscrambled or scrambled channel
while recording it.
– record an unscrambled channel while watching
another unscrambled channel (only when you
connect a cable-compatible TV).
• A/B switch “A”:record and watch an unscrambled
channel which comes bypassing
the cable box.
• A/B switch “B”:record and watch a scrambled or
unscrambled channel coming
through the cable box.
Connections (continued)
This set-up will enable you to:
– watch or record a channel through the cable box
via the LINE IN (AUDIO/VIDEO) jacks.
You will need to:
• press I.SELECT so that the VCR display shows
“L”.
OUT
(
TO TV)
IN
(FROM ANT.)
L
R
LINE
OUT
VIDEO
AUDIO
OUT
(
TO TV)
IN
(
FROM ANT.)
RF
L
R
LINE
OUT
VIDEO
AUDIO
Incoming cable
Cable box
OUT
IN
Incoming cable
Cable box
OUTIN
OUT
(
TO TV)
IN
(
FROM ANT.)
RF
L
R
LINE
OUT
VIDEO
AUDIO
A
B
A
B
A
B
A/B switch
Cable box
OUT
(
TO TV)
IN
(
FROM ANT.)
RF
L
R
LINE
OUT
VIDEO
AUDIO
Cable box
This set-up will enable you to:
– record an unscrambled channel.
– watch an unscrambled channel while recording it.
– record an unscrambled channel while watching
another (scrambled or unscrambled).
You will need to:
• set TV channel to the output channel of the cable
box.
turn on the cable box and select cable channel 3
or 4 according to the output channel of the VCR.
• to record a channel while watching another, press
TV/VCR on the remote control to turn off the
“VCR” indicator in the VCR display and select a
desired cable channel on the cable box.
•
This set-up will enable you to:
– watch an unscrambled or scrambled channel
while recording it.
– record any channels through the cable box.
You will need to:
• set VCR channel to the output channel of the
cable box, and select a desired cable channel on
the cable box.
• while the VCR is turned off or the “VCR” indicator
is not lit in the VCR display, set TV channel to the
output channel of the cable box.
• set TV channel 3 or 4 to receive video signal.
(See page 14. )
Front AV
W522CG ENG new (10-19) 2/20/04, 11:1612