Filter
Top Products
28
MTS Broadcast Compatibility
This VCR can receive or record MTS (Multichannel TV Sound) broadcasts. By connecting the VCR to
your stereo system or stereo TV, you will experience the SAP or stereo sound.
Preparation
Connect a stereo TV or stereo system to the AUDIO OUT jacks of the VCR.
Recording the SAP/Stereo Broadcast
1
On the SET UP screen (page 14),
select “SAP SET” using PLAY or
STOP, and set to “ON” using REW
or FF.
2
Press PROG. once to exit.
3
Perform a recording.
SAP (Second Audio Program broadcast):
A separate audio program, usually broadcast in a second language with the
main language.
Selecting a sound
Sounds recorded on the tape
According to your setting of “SAP SET” on the SET UP screen, the sound is recorded onto different
tracks of the tape as below. Set “SAP SET” to “ON” or “OFF” appropriately.
Hi-Fi sound track
Contents of recorded sound
On-Screen Display
(Press DISPLAY.)
Setting of “SAP SET”
on the SET UP
screen
Type of receiving
broadcast
Normal sound
track (Mono)
L
R“SAP” “STEREO”
“ON” or “OFF” not lit not lit MONO MONO MONO
“ON” or “OFF” not lit lit MONO (MIXED)
“ON” lit not lit MONO MONO SAP
“OFF” lit not lit MONO MONO MONO
“ON” lit lit MONO MONO SAP
“OFF” lit lit MONO (MIXED)
STEREO
STEREO
Regular
(monaural audio)
Stereo
Regular+SAP
Stereo+SAP
Sounds in playback
You can play SAP and/or stereo broadcasts with this VCR. Press A.SELECT to select a desired sound.
Note
When the TV is connected to the RF OUT terminal of the VCR, the output sound is monaural.
Desired sound
SAP sound
Stereo sound
L , R indicators in the On-Screen display
R (right) is on.
Both R (right) and L (left) are on.
Sound output
SAP
HIFI Sound
RECORDING
SLOW
PAUSE/STILL
REC TIMER
TV
VCR
POWER
I.SELECT
SP/ SLP
DISPLAY
TV VOL
COUNTER
PROG.
CANCEL
REMAIN/
RESET
COUNT
EJECT
CM SKIP
1
2
3
6
5
4
100
9
87
0
ENTER
A.SELECT
STOP
FF
REW
PLAY
1
A.SELECT
DISPLAY
2
W522CG ENG new(24-29) 2/20/04, 11:1928