Filter
Top Products
14
Setting the Language
1
Press POWER to turn on the VCR.
2
Press PROG..
The following screen appears on the TV.
PREPARATION
Initial Settings Using On-screen Display
The language selection and clock setting must be set first when VCR is first plugged in or after it
encounters a power failure.
Preparation
• Turn on the TV, and select the video channel (3 or 4), or the video input mode if you made the Audio/Video
connection (page 11).
• Press VCR to set the remote control operating the VCR.
4
Press PROG. to return to the normal TV screen.
SLOW
PAUSE/STILL
REC TIMER
TV
VCR
POWER
I.SELECT
SP/ SLP
DISPLAY
TV VOL
COUNTER
PROG.
CANCEL
REMAIN/
RESET
COUNT
EJECT
CM SKIP
1
2
3
6
5
4
100
9
87
0
A.SELECT
ENTER
STOP
FF
REW
PLAY
VCR
POWER
REW
FF
PLAY, STOP
PROG.
ENTER
3
Select the language using PLAY or
STOP and press PROG..
The screen turns to the MENU screen.
Optional settings on the SET UP screen
Other optional settings can be made. Press ENTER while “SET UP” is
selected on the MENU screen. The screen turns to the SET UP screen.
To exit, press PROG. once.
Page 22
Page 28
Page 23
To change the language, move down here and set to the desired one.
Page 14
1
Press PROG..
2
Select SET UP using FF or REW and press ENTER.
3
Select the VCR OUTPUT using PLAY or STOP and set VCR
output channel using FF or REW.
Setting the VCR Output Channel
4
Press PROG. to exit.
A message will appear indicating the VCR output channel is changed.
W522CG ENG new (10-19) 2/20/04, 11:1614