Filter
Top Products
It is important for the TV to know what type of
signal-Cable TV (CATV)or a normal antenna
you are using. Choose your signal (Antenna or
Cable):
Press MENU to see the main menu.
Press CH+ or CH- to highlight Setup.
Press OK to enter the Setup submenu.
TV/CATV is highlighted. Press VOL+ or
VOL- to select "IV or CATV.
Choose CATV if you have Cable TV
service. (See page 4 for connection
details.) If you do not have Cable TV
service and you connected an antenna
to the TV,choose TV. (See page 5 for
connection details.)
Press MENU repeatedly to exit the
menu or the menu will automatically
disappear within a few seconds if no
buttons are pressed on the remote
control.
Models 20V412T and 20V500T: Ifyou
have one of these models you won't see
the Sound menu and your remote will not
have the MTS or SOUND buttons.
Picture
TM/CATV CATV
TV/CATV TV
When CATV is selected,
channels 1-125 are available.
When TV is selected, only
channels 2-69 are available.
You cannot select the Setup
menu if the TV is set to avideo
input channel (FRNT). Press
INPUT repeatedly to get to
regular TV programming.