Filter
Top Products
Manual Channel Tuning allows you to search for
channels that may have been missed during the
Auto Search process. For example, if you are
looking for a channel between 60 and 70, start
the search at channel 60 and go up.
Press MENU to see the main menu.
Press CH+ or CH- to highlight Setup.
Press OK to enter the Setup submenu.
TV/CATV is highlighted. Press VOL+ or
VOL- to select TV or CATV (whicheveryou
have).Detailsare on page 11.
Press OH+ or OH- repeatedly to highlight
Channel.
Press VOL+ or VOL- to enter the channel
number at which you want to begin the
search.
Press CH+ or CH- repeatedly to select
Manual.
Press VOL+ to start searching upward (for
example, starting at channel 60 and going
up to 61,62, 63, etc.). Press VOL- when
you find the channel you want. This stops
the search. Otherwise the search will stop at
the first available channel.
Or, press VOL- to start searching
downward (for example, starting at channel
60 and going down to 59, 58, 57, etc.).
Press VOL+ when you find the channel
you want. This stops the search. Otherwise
the search will stop at the first available
channel.
Press MENU repeatedly to exit the menu
or the menu will automatically disappear
within a few seconds if no buttons are
pressed on the remote control.
Models 20V412T and 20V500T: If you have
one of these models you won't see the
Sound menu and your remote will not have
the MTS or SOUND buttons.
Picture
r
J
.... 6 " "°6
J® ®F
i........... 6
IQ (Z) Q_
INPe_ E I_ES_T8 I_FO/0EL
1 I
0 _(Z),0 0
eE_e , o_
©
TV/CATV CATV
Channel 60
Manual Down
You cannot select the Setup
menu if the TV is set to avideo
input channel (FRNT). Press
INPUT repeatedly to get to
regular TV programming.
13
Manual