Filter
Top Products
85
Programming Your Scanner
This setting determines whether the scanner will scan this group of channels.
Select your setting, then press
F.
Lockout — the group is not scanned.
Temporary L/O — the group is not scanned for this session. The L/O is
cancelled when you cycle power.
Unlocked — the group is scanned. The default setting is Unlocked.
[MENU]
Program System F
Select a system F
Edit Group F
Select a channel group F
Delete Group F
Confirm Delete?
Yes=”E” / No= ”.”
Important: Deleted channel groups cannot be restored. You must re-enter them.
[MENU]
Program System F
Select a system F
Edit Group F
Select a channel group F
Edit Channel F
Select an existing channel to edit or “New Channel” to create a new channel.
When you create a new channel you are prompted to enter the frequency (for
conventional systems) or Talk Group ID (for Trunked systems). Enter the
information for the channel, then press
F to proceed to setting additional channel
options.
[MENU]
Program System F
Select a system F
Edit Group F
Select the channel group F
Edit Channel F
Deleting Channel Groups MECL
Programming Channels MECL
Creating a Channel MECL
Editing the Channel Name (Alpha Tag) MECL