87
Programming Your Scanner
Select a channel group F
Edit Channel F
Select the channel F
Edit TGID F
To edit the Talk Group ID, enter the Talk Group ID you want using the number
keys. Then press
F.
For each channel, you can select the audio type that the channel receives.
[MENU] Program System F
Select the system F
Edit Group
Select the channel group F
Edit Channel F
Select an existing channel F
Set Audio Type F
Select from All, Digital Only, Analog Only F
All — The scanner automatically determines whether the audio is analog or
digital.
Digital Only — The scanner only remains on the channel if it is carrying APCO
25 digital audio
Analog Only — The scanner only remains on the channel if it is carrying analog
audio.
If you are programming a conventional system and select Analog Only, the
scanner prompts you to select the CTCSS/DCS tone setting. See the next section.
To program a channel with a CTCSS or DCS setting, your conventional system
audio must be set to Analog Only first.
[MENU]
Program System F
Select the system F
Edit Group F
Select the channel group F
Edit Channel F
Select the channel F
Setting the Audio Type MECL
Selecting CTCSS/DCS Tones C