Filter
Top Products
If there is no separate TV code listed, you will
need to perform the following steps to access
volume control:
a. Press and hold SETUP until the VCR key
blinks twice, then release SETUP.
b. Enter 9 - 9 - 3. The VCR key will blink
twice.
c. Press VCR once. The VCR key will blink
twice.
6. For future reference, write down each work-
ing device code in the boxes below:
TV/VCR
TV (if used)
10
Cox Manual - final - 082103.qxd 8/21/03 1:31 PM Page 10