Filter
Top Products
SEARCHING FOR YOUR CODE
If your TV, VCR, Cable Converter or Auxiliary device
does not respond to the Cox Universal Remote Control
after trying all of the codes listed for your brand, or if
your brand is not listed at all, try searching for your
code.
For example, to search for a code for your TV:
1. Turn on your TV.
2. On the remote control, press TV once.
Then press and hold SETUP until the
TV key blinks twice, then release SETUP.
3. Enter 9 - 9 - 1. The TV key will blink twice.
4. Aim the remote control at the the TV and
slowly alternate between pressing POWER and
TV.
Stop when the TV turns off.
NOTE: In the search mode, the remote control
will send IR codes from its library to the selected
device, starting with the most popular code first.
5. Press SETUP once to lock in the code.
6. To search for the codes of your other devices,
repeat steps 1–5, but substitute the appropri-
ate key (that is, AUX, VCR, or CABLE) for the
(Auxiliary, VCR, or Cable) device you are
searching for.
11
Cox Manual - final - 082103.qxd 8/21/03 1:31 PM Page 11