Filter
Top Products
Installing Batteries
Your Kameleon-C6 Remote requires batteries.
Four AAA alkaline batteries are included so you
can immediately enjoy your Kameleon-C6
Remote.
ABOUT REPLACING BATTERIES
• Use only new batteries of the required size and
recommended type.
• Do not mix old and new batteries,different
types of batteries (e.g.standard,alkaline or
rechargeable), or rechargeable batteries of differ-
ent capacities.
• If you do not plan to use the remote for an
extended period of time,remove the batteries.
Batteries can leak chemicals that can destroy elec-
tronic parts.
• Dispose of old batteries promptly and properly.
• Do not burn or bury them.
Replace your batteries when one of the follow-
ing conditions occurs:
• The bottom segment of the IR indicator blinks 5
times after each keypress.
• The remote no longer responds to movement.
TO INSTALL BATTERIES
1.Unscrew and remove the battery cover from
the back of your Kameleon-C6 Remote.
2.Match the batteries to the “+”and “-”marks
inside the battery case,then insert the batteries
accordingly.
3.Reposition the battery cover and tighten the
screw.
R
EMEMBER
• YOURKAMELEON-C6 REMOTE HASPERMANENT MEMORYRETENTION.
REMOVING THEBATTERIES WILL NOTREQUIREYOUTO REPROGRAM THE
REMOTE.
• YOURKAMELEON-C6 WILL “SLEEP”(TURN OFF) AFTER7 SECONDS OF
INACTIVITYTO CONSERVE THEBATTERIES
.PICKING UPTHE REMOTEOR
PRESSING ANY KEY WILL TURN ON THEREMOTEAND THE KEYPAD BACK-
LIGHT.
• T
HE FIRSTTIMEYOUINSTALLBATTERIES,YO U WILLNEED TO PRESSTHE
TOUCH-PANELTOACTIVATETHE REMOTECONTROL.
4 Installing Batteries
KAMELEON-C6 REMOTE
Kameleon C6_v10.qxd 5/14/03 9:16 AM Page 4