Filter
Top Products
38
U
S
I
N
G
M
X
9
5
0
C
O
R
E
E
N
G
I
N
E
T
O
E
D
I
T
Enable or Disable Standalone Editing
You can disable the Edit menu of the MX-950. This is the menu that appears when you press and hold LISTEN
and ENTER for five seconds. Though the ability to change the labels and to learn codes standalone is useful to
some installers, you may want to prevent your customer from accessing these settings.
1 Open the Remote Control Setup window by selecting it from the Communications Menu.
2 Check the Disable checkbox if you want to prevent anyone from accessing the Edit menu on the
MX-950. Click on OK when you’ve made your changes.
TIP - You cannot disable the Settings Menu.
The Settings menu appears when WATCH and Enter are pressed and held for five seconds.
Enable or Disable Standalone Editing