Filter
Top Products
32
From the RF Settings Menu, select IR/RF.
Decide whether you are changing the Signal for all devices or just
one of the devices of the Omega.
Select ALL to change the signal settings to
ALL devices in the Omega. Then, go to Step
4.
Select DEVIC to change the signal settings to
just one of the devices in the Omega. Then,
go to Step 3.
The display changes to a list of the names of your devices. If you have
two pages of devices, pressing either of the page buttons will display
the other page. Select the device you would like to change IR/RF set-
tings, then go to Step 4.
Select the new setting by pressing the desired button, then press SAVE
to save your new setting and return to the RF settings menu.
The Omega
1
2
4
3
Change IR from ON to OFF.
Change RF from ON to OFF.
Save the new setting
Select a device
Page Button
displays the
other page
of devices.
Exit this Menu without changing
the IR/RF settings