Filter
Top Products
33
Universal Remote Control, Inc.
ID # - Setting Base Station Address
When you are installing a system within 100 feet of another equipment
location in the same home OR near a home, condo, yacht or motor
home that might potentially have an RF remote control of any kind, it is
recommended that you use an addressable base station and set the
address as described here.
You can operate up to 15 different equipment locations, each with an
MRF-250 or MRF-300 assigned a unique Receiver ID#. You program
each or all of your Omega devices to the appropriate equipment loca-
tion by assigning the corresponding ID# in the RF Settings Menus.
From the RF Settings Menu, select ID#.
Decide whether you are changing the ID# for all devices or just one
of the devices of the Omega.
Select ALL to change the ID# for ALL devices
in the Omega. Then, go to Step 4.
Select DEVIC to change the ID# for just one
of the devices in the Omega. Then, go to Step
3.
The display changes to a list of the names of your devices. If you have
two pages of devices, pressing either of the page buttons will display
the other page. Select the device you would like to change the ID#,
then go to Step 4.
1
2
3
Select a device
Page Button
displays the
other page
of devices.