Filter
Top Products
STEP 6: After you’ve entered the code number and the component
has turned off, press the POWER button on your remote to turn the
component back on.
Now it’s time to test the VOLUME and CHANNEL buttons (or PLAY
and STOP buttons for VCR and DVD) to make sure they all work. For
example, maybe your Sony TV turned off with code number 147, but
the volume controls did not work properly. If this is the case, repeat
STEP 5 using the next code number until you find a perfect match.
STEP 7: Once you have found a correct code, you must save it.
Press the component button you just programmed, in this case TV,
one more time to store the code number. The component button LED
light will blink three times to confirm that the code was successfully
stored. Now when you press the TV component button, all of the
buttons will work with your TV.
NOW, PROGRAM THE REST OF YOUR COMPONENTS BY REPEAT-
ING STEPS 3 THROUGH 7.
11
IMPORTANT: If the Pre-Programmed Code Method did not work
for you, try the Auto-Search Method next as outlined on page 12.