Filter
Top Products
PROGRAMMING DEVICE CONTROL
(continued)
5. Aim the remote control at the device and
press
POWER once. The device should turn
off.If it does not,repeat steps 2 through 5
(starting on the previous page),trying
each code for your brand until you find
one that works.If it still doesn’t work,try
Searching For Your Code below.
NOTE:If the device does not have a POWER
key,press the (Play) key.
6. Repeat steps 1 through 5 (starting on the
previous page) for each device you want to
control. For future reference, write down
each working device code in the following
boxes:
DVD/VCR Code:
Device Type:____________________
AUX Code:
Device Type:____________________
CBL/SAT Code:
Device Type:____________________
TV Code:
SEARCHING FOR YOUR CODE
If your device does not respond to the remote control
after trying all codes listed for your brand,or if your
brand is not listed at all,try searching for your code.
NOTE:Before performing a code search for a CD or DVD player
or a VCR,turn on the device and insert the required media.
For example,to search for a code for your TV:
1. On the remote control,press TV once.
2. Press and hold SET until the LED (red light)
blinks twice,then release
SET.
3. Enter 9 - 9 - 1.The LED will blink twice.
10
IMPVE4P manual 1.0 4/11/03 4:34 PM Page 10