Filter
Top Products
5
Key Charts
When the LED (red light) blinks,the
remote control is working and (after
programming) is sending signals.
Press
DVD/VCR,AUX,CBL/SAT,or TV
once to select a desired home
entertainment device to control.
Also see the Device Table on page 7.
Press
POWER once to turn on or off
the selected device.For master
power control, see Programming
A Master Power Macro on page 12.
Use the keypad (
1 ~ 9 and 0) to
directly select channels (e.g.,
009
or 031).
Use TV/VID to switch the TV’s input
to view TV or video programs.
Press
ENTER once after entering
the channel numbers on some TVs.
Use
GUIDE to display your selected
device’s program guide or setup
menu.
Press
MENU once to display your
selected device’s main menu.
Use
INFO/OSD to display the current
channel and program information
or on-screen directory.
Use
EXIT to exit from your selected
device’s guide or menu.
Use the
Cursor Keys to move the
cursor in the program guide and
menu screens.
Use
SELECT to choose options from
your selected device’s menu or guide.
Press
LAST once to recall the last
channel.For PVRs,use
LAST to
select live or recorded video.
Use
FAV to scan through all channels,
or after programming, to scan
through 10 favorite channels.
continued on next page...
IMPVE4P manual 1.0 4/11/03 4:34 PM Page 5