Universal Remote Control URC-4041 Universal Remote User Manual


 
Clearing The Master Power Macro
1. Press and hold SET until the LED (red light)
blinks twice,then release
SET.
2. Enter 9 - 9 - 5.The LED will blink twice.
Then press
POWER once.
3. Press and hold
SET until the LED blinks
twice, then release
SET.The Master Power
Macro is now cleared.
USING KEYMOVER
The One For All DVD Expert Universal Remote Control
includes a Keymover feature that allows you to map
(or copy) keys from one mode (i.e.,source mode) to
another mode (i.e.,destination mode).
NOTE:The following keys should not be used as a source or
destination: DVD/VCR,AUX,CBL/SAT,TV,SET,FAV,and REC.
Programming Keymover
For example,if your DVD player does not have volume
control,you can map those keys (i.e.,
VOL,VOL,and
MUTE) from TV mode to DVD/VCR mode as follows:
1. Press and hold SET until the LED (red light)
blinks twice,then release
SET.
2. Enter 9 - 9 - 4.The LED will blink twice.
3. For the source mode,press TV once.
4. For the source key,press VOLonce.
5. For the destination mode,press
DVD/VCR
once.
6. For the destination key,press VOLonce.
7. The
LED will blink twice,indicating the
keymoved sequence is correct.
8. Repeat steps 1 through 7 twice more to
map remaining volume control keys,
substituting
VOLand MUTE as source and
destination keys in steps 4 and 6.
continued on next page...
13
IMPVE4P manual 1.0 4/11/03 4:34 PM Page 13