Filter
Top Products
VBPresenter
ETV Portal Server Admin Guide 115
Configuring for Live Presentations
You must perform the following steps to configure the Portal Server for each live
presentation.
T To configure the Portal Server for a live presentation:
1. Go to
Global Settings > Program Names and add a program name (for example Live
Presentation
). Then use this same name in the MCS Program Name field in VBPresenter.
This is the title that will be displayed on the Live Broadcasts page during a live
presentation.
2. If necessary, give your end users access to this live presentation. Go to
Users > Add/
Modify Live Channel Privileges
and select this Program Name.
Launching a Live Presentation
The web server in VBPresenter can be configured with either a domain name or an IP
address. If configured with an IP address, you must launch the MCS client using the IP
address in order to view presentations successfully; if configured with a domain name, you
must launch the MCS client using the domain name. You cannot mix-and-match domain
names and IP addresses or Session Expired and Maximum Viewers Exceeded errors may be
displayed by the Portal Server.
T To launch a live presentation:
1. Once the Portal Server is configured as explained above, go to VBPresenter, upload your
slides, go
LIVE ONLINE, and begin the presentation. This makes the presentation
immediately available to authorized users from a link on the Live Broadcasts page in the
Portal Server. The link will be automatically removed from this page at the end of the
presentation. If the presentation is terminated abnormally for any reason (for example if
the presenter exits without going
OFFLINE), you may need to manually remove the
presentation link from the
Live Broadcasts page. See Live Presentations on page 83 for
details.
Hint To pre-configure a presentation, create a
Program Name in advance on the Portal
Server and assign
Live Channel Privileges to users. Then use the same name in the
MCS Program Name field in VBPresenter when giving the presentation. The MCS
Program Name
will be available on the Live Broadcasts page for any users who have
permissions to view that channel