Filter
Top Products
Global Settings
ETV Portal Server Admin Guide 45
3. In Select STB, select one or more existing STB for which a SAP has been received. This
populates the STB Configuration panel. (If you select multiple STBs, it does not populate
the panel; if you need to configure the STBs, you must add them one at a time.)
4. Complete or modify the fields in
STB Configuration as necessary and click Submit. This
adds the new configuration to the list of configured STBs shown on the previous page.
Note The only time you will manually complete the STB Configuration fields is when you
are defining the configuration for an STB that will be added to the network at a later
time. In this case, you will need to know the configuration data in advance.
Host Name Required. Host name of STB.
IP Address Required. IP address of STB.
User Name Defaults to system-defined value if blank.
User Password Defaults to system-defined value if blank.
Confirm Password Defaults to system-defined value if blank. Must match User Password
if entered above.
Software Revision Optional.
STB Model Select from the dropdown.
Start Mode Select from the dropdown: ETV Portal Server, Local, or Local-
Fullscreen