Vidikron Vision 12 Projection Television User Manual


 
Installation
14 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
PRE
L
IMINAR
Y
Notes on Remote Control
Operation
The remote control can be used to control the projector within the ranges shown in Figure
3-1.
Figure 3-1. Available Range of the Remote Control
For best results, hold the remote control within 23 feet (7m) of the back or top sensor and
aligned within 30°.
Do not drop the remote control or expose it to moisture or high temperature.
The remote control may malfunction under a fluorescent lamp. If that occurs, move the
projector away from the fluorescent lamp.
Make sure that there is nothing obstructing the infrared beam between the remote
control and the IR receiver on the projector.
If the effective range of the remote control decreases, or it stops working, replace the
batteries with new ones.
Ambient conditions may possibly impede the operation of the remote control. If this
happens, point the remote control at the projector, and repeat the operation.
The signal from the remote control can be reflected by the screen.
30°
45°
23'(7 m)
45°
30°
23'(7 m)
Note