Filter
Top Products
Installation
Vidikron Vision 85 Owner’s Operating Manual 25
PRE
L
IMINAR
Y
Install Lens Motor: Position the AutoScope Lens Motor (item #1) as shown in Figure 3-8.
Line up the mounting holes on the lens motor housing with those on the underside of the
projector. Secure the motor to the projector with the six remaining 10-32 x 1/2” Pan-Head
Phillips screws (item
#2).
Figure 3-8. AutoScope Lens Motor Installation
After you have installed the AutoScope lens motor, proceed with Mounting the Vision 85 on
page 27.